Brilliant Marvel Bathroom 3-in-1 Heater / Exhaust Fan / Tri-Colour LED Light

Brilliant Marvel Slimline Bathroom 3-in-1 Heater / Exhaust Fan / Tri-Colour LED Light.

Modern slimline linear design bathroom 3-in-1 with a sleek white trim finish. Featuring a next generation ultra-quiet 55w ball bearing exhaust fan to create one of the quietest but best performing exhaust fans on the market, boasting a very high airflow extraction rate of up to 500m³/hour to keep your bathroom fresh and well ventilated. Wall controller with 3 switches included for separate heat, light and fan control.

The Brilliant Marvel features instant halogen heat from the 1000W R7 central heat lamp and up to 2400 lumens from the 2 x advanced energy efficient Tri-Colour 8w LED panels, which are strategically placed on the outside to maximise light output and spread. Easily change the colour output of the LED lights from Warm White (3000K), Cool White (4200K) or Daylight (6000K) with a simple flick of the switch from the wall controller!

This fitting is suitable for bathrooms of all sizes.

Electrician friendly design incorporates a side-entry duct (ø150mm) for easier installation and improved air extraction performance. Cut out template is included. Heavy duty housing provides market leading durability.

Dimensions:
Face: 500 x 350mm
Unit depth: 210mm (minimum ceiling depth of 220mm is required)
Cut out size: 475 x 325mm

Full Specifications:
- 3 in 1 Bathroom solution - Heater/Exhaust Fan/LED Light
- 1 x 1000w R7 linear heat lamp for instant heating
- Twin 8w LED lights: 1200 lumens each (2400lm total), Tri-Colour selectable
- Light output can be easily changed between Warm White (3000K), Cool White (4200K) and Daylight (6000K)
- High air extraction up to 500m³/hour
- Super quiet 55w ball bearing exhaust fan motor
- Thermal cut out and overheating protection for safety
- Side entry draft stopper and 1.5m, ø150mm flexible duct included, exterior grille
- Wall controller with 3 switches included for separate heat, light and fan control
- Cutout template included
- 3 Year in-home (parts and labour) warranty
- Face: 500 x 350mm
- Unit depth: 210mm (minimum ceiling depth of 220mm is required)
- Cut out size: 475 x 325mm

Important Installation & Warranty Information

Do not install bathroom heater/light/exhaust units directly above or close to a shower.
Installing these fittings in the incorrect position greatly increases the risk of moisture entering the LED light or internal components, which can cause failure. Units installed directly over, or too close to, the shower zone may void your warranty.

These products must be installed by a licensed electrician.
They are multi‑function appliances and incorrect installation may void the warranty.

No proof of licensed electrical installation = no warranty or replacement.
Failure to provide evidence of installation by a licensed electrician may void your warranty.